Files
g.hnyhua.cn/TencentCloud/Cws/V20180312/Models/Site.cs

275 lines
10 KiB
C#
Raw Normal View History

/*
* Copyright (c) 2018 THL A29 Limited, a Tencent company. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*/
namespace TencentCloud.Cws.V20180312.Models
{
using Newtonsoft.Json;
using System.Collections.Generic;
using TencentCloud.Common;
public class Site : AbstractModel
{
/// <summary>
/// 站点ID。
/// </summary>
[JsonProperty("Id")]
public ulong? Id{ get; set; }
/// <summary>
/// 监控任务ID为0时表示未加入监控任务。
/// </summary>
[JsonProperty("MonitorId")]
public ulong? MonitorId{ get; set; }
/// <summary>
/// 站点url。
/// </summary>
[JsonProperty("Url")]
public string Url{ get; set; }
/// <summary>
/// 站点名称。
/// </summary>
[JsonProperty("Name")]
public string Name{ get; set; }
/// <summary>
/// 验证状态0-未验证1-已验证2-验证失效,待重新验证。
/// </summary>
[JsonProperty("VerifyStatus")]
public ulong? VerifyStatus{ get; set; }
/// <summary>
/// 监测状态0-未监测1-监测中2-暂停监测。
/// </summary>
[JsonProperty("MonitorStatus")]
public ulong? MonitorStatus{ get; set; }
/// <summary>
/// 扫描状态0-待扫描无任何扫描结果1-扫描中正在进行扫描2-已扫描有扫描结果且不正在扫描3-扫描完成待同步结果。
/// </summary>
[JsonProperty("ScanStatus")]
public ulong? ScanStatus{ get; set; }
/// <summary>
/// 最近一次的AIScanner的扫描任务id注意取消的情况。
/// </summary>
[JsonProperty("LastScanTaskId")]
public ulong? LastScanTaskId{ get; set; }
/// <summary>
/// 最近一次扫描开始时间。
/// </summary>
[JsonProperty("LastScanStartTime")]
public string LastScanStartTime{ get; set; }
/// <summary>
/// 最近一次扫描完成时间。
/// </summary>
[JsonProperty("LastScanFinishTime")]
public string LastScanFinishTime{ get; set; }
/// <summary>
/// 最近一次取消时间,取消即使用上一次扫描结果。
/// </summary>
[JsonProperty("LastScanCancelTime")]
public string LastScanCancelTime{ get; set; }
/// <summary>
/// 最近一次扫描扫描的页面数。
/// </summary>
[JsonProperty("LastScanPageCount")]
public ulong? LastScanPageCount{ get; set; }
/// <summary>
/// normal-正常扫描deep-深度扫描。
/// </summary>
[JsonProperty("LastScanScannerType")]
public string LastScanScannerType{ get; set; }
/// <summary>
/// 最近一次扫描高风险漏洞数量。
/// </summary>
[JsonProperty("LastScanVulsHighNum")]
public ulong? LastScanVulsHighNum{ get; set; }
/// <summary>
/// 最近一次扫描中风险漏洞数量。
/// </summary>
[JsonProperty("LastScanVulsMiddleNum")]
public ulong? LastScanVulsMiddleNum{ get; set; }
/// <summary>
/// 最近一次扫描低风险漏洞数量。
/// </summary>
[JsonProperty("LastScanVulsLowNum")]
public ulong? LastScanVulsLowNum{ get; set; }
/// <summary>
/// 最近一次扫描提示信息数量。
/// </summary>
[JsonProperty("LastScanVulsNoticeNum")]
public ulong? LastScanVulsNoticeNum{ get; set; }
/// <summary>
/// 记录添加时间。
/// </summary>
[JsonProperty("CreatedAt")]
public string CreatedAt{ get; set; }
/// <summary>
/// 记录最近修改时间。
/// </summary>
[JsonProperty("UpdatedAt")]
public string UpdatedAt{ get; set; }
/// <summary>
/// 速率限制每秒发送X个HTTP请求。
/// </summary>
[JsonProperty("LastScanRateLimit")]
public ulong? LastScanRateLimit{ get; set; }
/// <summary>
/// 最近一次扫描漏洞总数量。
/// </summary>
[JsonProperty("LastScanVulsNum")]
public ulong? LastScanVulsNum{ get; set; }
/// <summary>
/// 最近一次扫描提示总数量
/// </summary>
[JsonProperty("LastScanNoticeNum")]
public ulong? LastScanNoticeNum{ get; set; }
/// <summary>
/// 扫描进度,百分比整数
/// </summary>
[JsonProperty("Progress")]
public ulong? Progress{ get; set; }
/// <summary>
/// 云用户appid。
/// </summary>
[JsonProperty("Appid")]
public ulong? Appid{ get; set; }
/// <summary>
/// 云用户标识。
/// </summary>
[JsonProperty("Uin")]
public string Uin{ get; set; }
/// <summary>
/// 网站是否需要登录扫描0-未知;-1-不需要1-需要。
/// </summary>
[JsonProperty("NeedLogin")]
public long? NeedLogin{ get; set; }
/// <summary>
/// 登录后的cookie。
/// </summary>
[JsonProperty("LoginCookie")]
public string LoginCookie{ get; set; }
/// <summary>
/// 登录后的cookie是否有效0-无效1-有效。
/// </summary>
[JsonProperty("LoginCookieValid")]
public ulong? LoginCookieValid{ get; set; }
/// <summary>
/// 用于测试cookie是否有效的URL。
/// </summary>
[JsonProperty("LoginCheckUrl")]
public string LoginCheckUrl{ get; set; }
/// <summary>
/// 用于测试cookie是否有效的关键字。
/// </summary>
[JsonProperty("LoginCheckKw")]
public string LoginCheckKw{ get; set; }
/// <summary>
/// 禁止扫描器扫描的目录关键字。
/// </summary>
[JsonProperty("ScanDisallow")]
public string ScanDisallow{ get; set; }
/// <summary>
/// 访问网站的客户端标识。
/// </summary>
[JsonProperty("UserAgent")]
public string UserAgent{ get; set; }
/// <summary>
/// 内容检测状态0-未检测1-已检测;
/// </summary>
[JsonProperty("ContentStatus")]
public ulong? ContentStatus{ get; set; }
/// <summary>
/// 最近一次扫描内容检测数量
/// </summary>
[JsonProperty("LastScanContentNum")]
public ulong? LastScanContentNum{ get; set; }
/// <summary>
/// For internal usage only. DO NOT USE IT.
/// </summary>
internal override void ToMap(Dictionary<string, string> map, string prefix)
{
this.SetParamSimple(map, prefix + "Id", this.Id);
this.SetParamSimple(map, prefix + "MonitorId", this.MonitorId);
this.SetParamSimple(map, prefix + "Url", this.Url);
this.SetParamSimple(map, prefix + "Name", this.Name);
this.SetParamSimple(map, prefix + "VerifyStatus", this.VerifyStatus);
this.SetParamSimple(map, prefix + "MonitorStatus", this.MonitorStatus);
this.SetParamSimple(map, prefix + "ScanStatus", this.ScanStatus);
this.SetParamSimple(map, prefix + "LastScanTaskId", this.LastScanTaskId);
this.SetParamSimple(map, prefix + "LastScanStartTime", this.LastScanStartTime);
this.SetParamSimple(map, prefix + "LastScanFinishTime", this.LastScanFinishTime);
this.SetParamSimple(map, prefix + "LastScanCancelTime", this.LastScanCancelTime);
this.SetParamSimple(map, prefix + "LastScanPageCount", this.LastScanPageCount);
this.SetParamSimple(map, prefix + "LastScanScannerType", this.LastScanScannerType);
this.SetParamSimple(map, prefix + "LastScanVulsHighNum", this.LastScanVulsHighNum);
this.SetParamSimple(map, prefix + "LastScanVulsMiddleNum", this.LastScanVulsMiddleNum);
this.SetParamSimple(map, prefix + "LastScanVulsLowNum", this.LastScanVulsLowNum);
this.SetParamSimple(map, prefix + "LastScanVulsNoticeNum", this.LastScanVulsNoticeNum);
this.SetParamSimple(map, prefix + "CreatedAt", this.CreatedAt);
this.SetParamSimple(map, prefix + "UpdatedAt", this.UpdatedAt);
this.SetParamSimple(map, prefix + "LastScanRateLimit", this.LastScanRateLimit);
this.SetParamSimple(map, prefix + "LastScanVulsNum", this.LastScanVulsNum);
this.SetParamSimple(map, prefix + "LastScanNoticeNum", this.LastScanNoticeNum);
this.SetParamSimple(map, prefix + "Progress", this.Progress);
this.SetParamSimple(map, prefix + "Appid", this.Appid);
this.SetParamSimple(map, prefix + "Uin", this.Uin);
this.SetParamSimple(map, prefix + "NeedLogin", this.NeedLogin);
this.SetParamSimple(map, prefix + "LoginCookie", this.LoginCookie);
this.SetParamSimple(map, prefix + "LoginCookieValid", this.LoginCookieValid);
this.SetParamSimple(map, prefix + "LoginCheckUrl", this.LoginCheckUrl);
this.SetParamSimple(map, prefix + "LoginCheckKw", this.LoginCheckKw);
this.SetParamSimple(map, prefix + "ScanDisallow", this.ScanDisallow);
this.SetParamSimple(map, prefix + "UserAgent", this.UserAgent);
this.SetParamSimple(map, prefix + "ContentStatus", this.ContentStatus);
this.SetParamSimple(map, prefix + "LastScanContentNum", this.LastScanContentNum);
}
}
}